AHP300 Transport Ventilator

The AHP300 is a new broad-featured transport ventilator designed to meet the specific needs of modern EMS response.

Features and Benefits

• Broad Featured Capability
  • Invasive and non-invasive support for infant (5 kg and up) to adult patients, with a flexible array of ventilation options including Pressure Control/Volume Control ventilation , SIMV/Assist Control spontaneous breath support, and stand-alone CPAP/BiLevel support.
• Enhanced Ease of Use
  • The AHP300 offers value-added features for intra-hospital and inter-hospital transport.
  • Quick Start Ventilation – Featuring programmable presets, the AHP300 allows trained caregivers to rapidly recall up to 5 saved ventilation protocols.
  • Long Battery Life – Up to 7.5 hours on internal battery, with auxiliary battery capability for up to 21 hours of battery life.
  • Oxygen Conserve Mode – Allows the use of low pressure sources (oxygen concentrator, liquid oxygen, etc.) to extend available oxygen.
• Multi-Environment Capability
  • For everyday transport or evacuation from extreme environments, the AHP300 has you covered. It features rugged shock and vibration resistance, and IPX22 water resistance.
• Low Cost of Ownership
  • The preventative maintenance schedule is simple, using high quality inexpensive battery and repair parts to lower your long term cost of ownership compared to other ventilators.

Materials Included

• AHP300 Ventilator Unit
• Power Cord
• Oxygen Hose
• Ventilation Circuit
• Carrying Strap
• User Manual

Technical Specifications

Dimensions

• Width: 13.3″ (34 cm)
• Depth: 5.3″ (13 cm)
• Height: 13.8″ (35 cm)

Controls/Settings

• Modes
  • (Pressure or Volume) A/CMV
  • (Pressure or Volume) SIMV
  • CPAP
  • Bi-Level Support (PS+CPAP) (can be programmed in custom mode)
  • NIV (non-invasive ventilation) available in all modes
  • 5 Programmable Quick Start Presets
• Tidal Volume: 40 to 2,000 ml
• RR (Respiratory Rate): 0 or 5 to 60 b/min
• I Time (Inspiratory Time): 0.5 to 2.0 sec
• PEEP/CPAP: 0 to 25 cmH2O/0 to 25 mbar
• PS (Pressure Support)**: 0 to 25 cmH2O / 0 to 25 mbar* (*PEEP + PS cannot exceed 25 cmH2O/mbar Operating Humidity 5 to 95% non-condensing)
• Flow: 5 to 60 L/min (flows > 80 LPM in PS Mode, CPAP and demand flows)
• Pressure Control (Target Pressure): 15 to 55 cmH2O / 15 to 55 mbar
• Ptrig (Sensitivity): -5 to -1 cmH2O / -5 to -1 mbar
• Manual Inflation: 2 second maximum
• FiO2: .21 to 1.00 Maximum I Time: 2 seconds
• Flow Wave Pattern: Square or descending** ** Based on mode selected
• Auto Lock Function: ON / OFF
• Remote Alarm Option: Normally Open/Closed

Monitored Parameters

• Paw (Peak, Base)
• Delivered Tidal Volume
• Spontaneous Breath Count
• Integrated Battery Level
• External Battery Level – When Attached

Calculated Parameters

• I:E Ratio
• Flow rate
• FiO2

Alarms

• High Airway Pressure: 10 to 55 cmH2O/10 to 55 mbar
• Low Airway Pressure: 5 to 15 cmH2O/5 to 15 mbar
• Back-up Ventilation Alert: 20 second fixed, apnea ventilation mode
• Low Source O2: Triggers at 40-37 psi
• Low Source Air: Triggers at 40-37 psi
• Device Alert: Malfunction alert Critical
• Battery: Approx. 20 minutes of battery charge remains
• Silence/Reset: 110 sec

Pneumatics

• Gas Delivery System: Internal dual diaphragm
• Air/Oxygen Mixer: Integrated
• Oxygen Input: 41 to 87 psig oxygen

Power Requirements

• AC Voltage: 110- 240 VAC, 50/60 Hz, max. 1A
• DC Voltage: 11-15 VDC, max. 5A

Integrated Battery Parameters

• Battery Composition: Sealed Lead Acid
• Run time; 100% O2: 7.5 hours
• Run time; 60% O2: 7.5 hours
• Run time; 100% air (On Compressor): 7 hours

With External Battery Pack Parameters (MCV-AUXBAT)

• Battery Composition: Sealed Lead Acid
• Run time; 100% O2: 7.5 hours
• Run time; 60% O2: 7.5 hours
• Run time; 100% air (On Compressor): 7 hours

Environmental:

• Shock: 100 G-Force
• Vibration: To IEC 60068-2-6
• Operating Temperature: 0° F to 122° F (-18° C to 50° C)
• Storage Temperature: -40° F to 140° F (-40° C to 60° C)
• Operating Humidity: 5 to 95% non-condensing
• Water Ingress: IPx 22

Signal Connections

• Remote Alarm: 1/4″ phone jack to connect to nurse call or remote system

Specialty Features

• Quick Start: Programmable presets to quickly recall pre-determined ventilation protocols
• Custom Modes: 3 additional programmable custom modes that are available for quick recall
• Oxygen Conserve: Allows the use of up to 10 LPM of oxygen at 3 to 40 psi through the DISS port or up to 10 LPM of oxygen at less than 10 psi through the low pressure barb fitting for use with oxygen concentrator.

Warranty Information

• 1-Year Warranty